• ọkọlọtọ ibe

Ihe nrụpụta PVC dị elu (PE PP) na ahịrị Extrusion Panel

Nkọwa dị mkpirikpi:

WPC mgbidi panel osisi mmepụta akara na-eji WPC ngwaahịa, dị ka ọnụ ụzọ, panel, osisi na na.Ngwaahịa WPC nwere enweghị ike imebi, nrụrụ n'efu, mmebi ahụhụ na-eguzogide, ezigbo ọkụ ọkụ, mgbape na-eguzogide, na nrụzi free wdg.


Nkọwa ngwaahịa

Mkpado ngwaahịa

Ngwa

WPC mgbidi panel osisi mmepụta akara na-eji WPC ngwaahịa, dị ka ọnụ ụzọ, panel, osisi na na.Ngwaahịa WPC nwere enweghị ike imebi, nrụrụ n'efu, mmebi ahụhụ na-eguzogide, ezigbo ọkụ ọkụ, mgbape na-eguzogide, na nrụzi free wdg.

Usoro Usoro

Screw Loader for Mixer → Mixer unit → Screw Loader for Extruder → Conical Twin Screw Extruder → Mold → Calibration Table → Kpupu igwe → Igwe ihe eji eme ihe → Tebụl njem → Nyocha ngwaahịa ikpeazụ & mbukota

Nkọwa

PEPPCO~3

Conical ejima ịghasa Extruder

Ma conical ejima ịghasa extruder na yiri ejima ịghasa extruder nwere ike tinye n'ọrụ na-emepụta wpc.Site na teknụzụ kachasị ọhụrụ, iji wedata ike ma hụ na ikike.Dị ka usoro dị iche iche si dị, anyị na-enye nhazi ihe nkedo dị iche iche iji hụ na mmetụta plasticizing dị mma na ikike dị elu.

Akpụkpọ

Extrusion anwụ isi ọwa bụ mgbe ọgwụgwọ okpomọkụ, mirror polishing na chroming iji hụ na ihe na-aga were were.
Igwe oyi na-agba ọsọ dị elu na-akwado ahịrị mmepụta na ọsọ ọsọ ọsọ ọsọ na arụmọrụ dị elu;
.Nnukwu mgbaze homogenity
.Obere nrụgide na-ewuli elu ọbụna na-arụpụta ihe dị elu

PVC (1)
PVC (2)

Tebụl nhazi

A na-edozi tebụl calibration site n'ihu azụ, aka ekpe-nri, elu-ala nke na-eweta ọrụ dị mfe ma dị mfe;
• Gụnye oghere zuru oke na mgbapụta mmiri
• Independent ọrụ panel maka mfe ọrụ

Bupụ igwe

Ụkwụ ọ bụla nwere moto traction nke ya, ọ bụrụ na otu moto traction kwụsịrị ịrụ ọrụ, moto ndị ọzọ ka nwere ike ịrụ ọrụ.Ọ na-ahọrọ moto servo ka ọ nwee ike traction ka ukwuu, ọsọ traction kwụsiri ike na oke ọsọ traction sara mbara.
Ngwa ndozi Claw
A na-ejikọta eriri niile na ibe ya, mgbe ị na-edozi ọnọdụ nke claws iji dọpụta ọkpọkọ na nha dị iche iche, ihe niile ga-ejikọta ọnụ.Nke a ga-eme ka ọrụ ngwa ngwa na mfe.
Ụkwụ ọ bụla nwere njikwa nrụgide ikuku nke ya, nke ziri ezi, ọrụ dị mfe.

PVC (3)
PVC (4)

Igwe eji egbutu

Igwe ịcha ahịhịa na-eweta igbutu ngwa ngwa ma kwụsie ike na mbepụ dị ire ụtọ.Anyị na-enyekwa ịkwọ ụgbọ mmiri na ịcha ihe jikọtara ọnụ nke bụ kọmpat na nhazi ego.
Track cutter ma ọ bụ na-ebuli sawter nakweere usoro nchịkọta uzuzu okpukpu abụọ;Ịnya ụgbọ ala na-emekọrịta ihe site na cylinder ikuku ma ọ bụ njikwa moto servo.

Data teknụzụ

Nlereanya YF600 YF800 YF1000 YF1250
Ogologo ngwaahịa (mm) 600 800 1000 1250
Model Extruder SJZ80/156 SJZ80/156 SJZ92/188 SJZ92/188
Ike Extruder (kw) 55 55 132 132
Nke kacha nke ike extrusion(kg/h) 280 280 600 600
Mmiri jụrụ oyi (m³/h) 10 12 15 18
Ail akpakọbara (m³/min) 0.6 0.8 1 1.2

  • Nke gara aga:
  • Osote:

  • Dee ozi gị ebe a ziga anyị ya

    Ngwaahịa ndị emetụtara

    • Ihe nrụpụta conical ejima ịghasa Extruder dị elu

      Ihe nrụpụta conical ejima ịghasa Extruder dị elu

      Njirimara SJZ usoro conical ejima ịghasa extruder nke a na-akpọkwa PVC extruder nwere uru dị ka mmanye extruding, ịdị mma dị elu, mgbanwe dị ukwuu, ndụ ogologo oge, ọsọ ọsọ dị ala, nbibi siri ike, ezigbo ngwakọta & mmetụta plasticization, na nhazi kpọmkwem nke ihe ntụ ntụ na wdg. Ogologo nhazi nkeji na-eme ka usoro kwụsiri ike na mmepụta a pụrụ ịdabere na ya n'ọtụtụ ngwa dị iche iche, nke ejiri maka ahịrị extrusion ọkpọkọ PVC, ahịrị ọkpọkọ ọkpọkọ, PVC WPC ...

    • Ihe nrụpụta PVC Crust Foam Board Extrusion Line

      Ihe nrụpụta PVC Crust Foam Board Extrusion Line

      Ngwa PVC Crust Foam board mmepụta akara na-eji ngwaahịa WPC, dị ka ọnụ ụzọ, panel, osisi na na.Ngwaahịa WPC nwere undecomposable, deformation free, ụmụ ahụhụ na-eguzogide ọgwụ, ezigbo fireproof arụmọrụ, mgbape eguzogide, na mmezi free wdg Ma Usoro Flow ịghasa Loader maka Mixer → Mixer unit → ịghasa Loader maka Extruder → Conical Twin Screw Extruder → Mold → Calibration Table Tray jụrụ oyi → Bupụ igwe → igwe ihe eji eme ihe → Tebụl na-eme njem → Nyocha ngwaahịa ikpeazụ &...

    • Profaịlụ PVC dị elu dị elu yana ahịrị extrusion profaịlụ osisi plastik

      Profaịlụ PVC dị elu na-apụta na profaịlụ plastik osisi ...

      Ngwa PVC profaịlụ igwe na osisi plastic profaịlụ igwe na-eji na-emepụta ụdị nile nke PVC profaịlụ dị ka window & ụzọ profaịlụ, PVC waya trunking, PVC mmiri trough, PVC uko ụlọ panel, wpc ngwaahịa na na.PVC profaịlụ extrusion ahịrị na-akpọ UPVC window eme igwe, PVC Profaịlụ Machine, UPVC profaịlụ extrusion igwe, PVC profaịlụ na-eme igwe na na.Osisi plastic profaịlụ igwe na-akpọ wpc profaịlụ extrusion akara, osisi plastic mejupụtara igwe, w ...

    • Ọsọ PE PP dị elu (PVC) eriri extrusion ọkpọkọ

      Ọsọ PE PP (PVC) corrugated Pipe Extrusio...

      Nkọwa A na-eji igwe ọkpọkọ rọba emepụta ọkpọkọ rọba, bụ nke a na-ejikarị na drainage obodo, usoro nsị mmiri, ọrụ okporo ụzọ, ọrụ nchekwa mmiri nke ala ubi, ma nwee ike iji ya rụọ ọrụ njem ụgbọ mmiri mmiri mmiri, nke nwere oke dị iche iche. nke ngwa.Corrugated ọkpọkọ na-eme igwe nwere uru nke elu mmepụta, kwụsiri ike extrusion na elu ogo nke akpaaka.Enwere ike ịmepụta extruder dị ka c pụrụ iche ...

    • Ahịrị extrusion ọkpọkọ ndị ọzọ maka ire ere

      Ahịrị extrusion ọkpọkọ ndị ọzọ maka ire ere

      Sheel Ware Skin Tipe Plat Play Metal Play Mode Thire (MMS) 0.5- φ75- 中75- φ75- φ25- φ20 φ110- φ400 0.4 -1.6 500 LSSW630 φ250- φ630 0.4-1.2 600 LSSW800 φ315- φ800 0.2-0.7 850 Pipe Size HDPE Solid Pipe Steel waya skeleton mesikwuru plastic composite pipe ọkpụrụkpụ(mmk) (mmk) ) φ200 11.9 7.05 7.5 4.74 ...

    • Ahịrị Extrusion PPR dị elu nke ọma

      Ahịrị Extrusion PPR dị elu nke ọma

      Nkọwa PPR ọkpọkọ na-ejikarị emepụta PPR ọkpọkọ mmiri ọkụ na oyi.PPR ọkpọkọ extrusion akara bụ nke extruder, ebu, agụụ calibration tank, ịgba jụrụ oyi tank, bupụ igwe, ọnwụ igwe, stacker na na.PPR ọkpọkọ extruder igwe na-ebupụ igwe na-ewere usoro ọsọ ọsọ ugboro, PPR ọkpọkọ cutter igwe na-anabata usoro igbutu na-enweghị ntụpọ na njikwa PLC, ịkpụ ogologo ogologo, na ịcha elu dị larịị.FR-PPR iko eriri PPR ọkpọkọ mejupụtara atọ ...

    • High mmepụta PVC ọkpọkọ extrusion akara

      High mmepụta PVC ọkpọkọ extrusion akara

      Ngwa PVC Pipe Making Machine na-eji na-emepụta ụdị ọ bụla nke UPVC ọkpọkọ maka ọrụ ugbo na mmiri mmiri, ụlọ mmiri na-emepụta mmiri na drainage na eriri eriri, wdg.Ọkụ nrụgide Mmiri na-ebunye mmiri na njem ụgbọ mmiri ọkpọkọ ogbugba mmiri n'ubi na-abụghị nrụgide Ọwa mmiri Owuwu ụlọ mmiri drainage Cable conduits, Conduit Pipe, nke a na-akpọkwa pvc Conduit Pipe Ime Machine Process Flow Screw Loader f...

    • Line Pipe Extrusion PE dị elu nke ọma

      Line Pipe Extrusion PE dị elu nke ọma

      Nkọwa Hdpe ọkpọkọ igwe a na-ejikarị eme ihe maka imepụta ọkpọkọ mmiri ugbo, ọkpọkọ mmiri, ọkpọkọ gas, ọkpọkọ mmiri, ọkpọkọ ọkpọkọ wdg. PE ọkpọkọ extrusion akara mejupụtara ọkpọkọ extruder, ọkpọkọ anwụ, nkeji calibration, tankị jụrụ oyi, ebugharị, cutter, stacker/coiler na akụkụ niile.Igwe na-emepụta ọkpọkọ Hdpe na-emepụta ọkpọkọ nwere dayameta site na 20 ruo 1600mm.Ọkpụkpọ ahụ nwere ụfọdụ ọmarịcha atụmatụ dị ka kpo oku na-eguzogide, ịka nká na-eguzogide, nnukwu igwe stren ...

    • Otu ịghasa Extruder dị elu nke ọma

      Otu ịghasa Extruder dị elu nke ọma

      Àgwàetiti igwe otu ịghasa plastic extruder igwe nwere ike hazie ụdị ngwaahịa rọba ọ bụla, dị ka ọkpọkọ, profaịlụ, mpempe akwụkwọ, mbadamba, panel, efere, eri, ngwaahịa oghere na ihe ndị ọzọ.A na-ejikwa otu skru extruder eme ọka.Otu ihe nkedo extruder igwe dị elu dị elu, ikike mmepụta dị elu, plasticization dị mma, na ike oriri dị ala.Igwe a na-apụ apụ na-ejigide elu gia siri ike maka nnyefe.Igwe extruder anyị nwere ọtụtụ uru.Anyi ma...